ERSATZTEIL-FINDER

Yokomo

Ordnen nach:
Empfohlen
12
Stabiliser Wire BD11 front 1.4mm
YOK-B11-412F4A
F1.4mm is added as a variation of the sway bar wire for BD11. This wire is one rank stiffer than the previous lineup and is mainly used to limit roll on high-grip surfaces. Compared to BD10, BD11 has a lower lever ratio and is more compatible with softer springs. However, on...
CHF9.90
Auf Lager  
+ −
Stabiliser wire BD11 hinten 1.4mm
YOK-B11-412R4A
CHF9.90
Auf Lager  
+ −
Rear short "X30" shock body for YZ-2DTM3 / CAL3
YOK-S4-S4MA
A shock body that can be used on the rear of the YZ-2DTM3 / CAL3 and the front of the YZ-2T. 1 bottle included.
CHF14.50
Auf Lager  
+ −
Body Mount Patch 6x0.5mm
YOK-ZR-BMP6B
entspricht: ZR-BMP6A
CHF7.50
Auf Lager  
+ −
Programmierbox für RPX3 ESC
YOK-BL-R26P3
A dedicated programmer is required to change the RPX3 program. We plan to distribute firmware to update the old programmer (BL-R26P), but you will need to revert to the old firmware (to be distributed) to change the program of the old ESC after the update.
CHF38.90
Auf Lager  
+ −
Receiver Capacitor (non-polarized)
YOK-BL-RRCP
This capacitor is connected to the BEC channel of the receiver to reduce noise and stabilize the servo current. When a large load is placed on the servo during driving, the capacitor can momentarily supplement power to stabilize the servo's operation. Since it is non-polarized, it...
CHF17.90
Auf Lager  
+ −
Big Bore Stossdämpfer Diaphragms 4stk. silicon
YOK-YS-8DS
CHF4.90
Auf Lager  
+ −
High Grade O-Ring (oil resistant blue, 8stk.)
YOK-YS-7HG2
CHF8.90
Auf Lager  
+ −
Progressive Federn 1.80 bis 2.10 20mm
YOK-B10-SSP18
This new spring matches the BD11 with a lower lever ratio than before. The overall setting is softer, making it a perfect match for the BD11's long suspension arms. You can find a good balance by choosing from this lineup for both front and rear. The progressive type spring has a pitch change...
CHF12.90
Auf Lager  
+ −
Progressive Federn BD11 1.90-2.20 20mm
YOK-B10-SSP19
This new spring matches the BD11 with a lower lever ratio than before. The overall setting is softer, making it a perfect match for the BD11's long suspension arms. You can find a good balance by choosing from this lineup for both front and rear. The progressive type spring has a pitch change...
CHF12.90
Auf Lager  
+ −
Progressive Federn BD11 2.10 bis 2.40 20mm
YOK-B10-SSP21
CHF12.90
Auf Lager  
+ −
Yokomo Factory Jacke XL
YOK-ZC-J27XLA
A windproof jacket with the Yokomo Racing Factory logo on the chest and back. Light nylon fabric, perfect for changing seasons. It has a slightly larger size.
CHF37.90
Auf Lager  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Preis

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF949
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung
Zurücksetzen (reset)