BDGT7-S65
The body shell has been designed on the ARRMA® Infraction T V2 chassis. Also compatible for Limitless frame*. Made with high quality and genuine polycarbonate Lexan®, 1.5mm thick Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:7 EinsatzOn-Road Lackierungunlackiert
CHF94.50
Auf Lager
+
BDGT7-R8
The body shell has been designed to fit the ARRMA® InfractionT V2 chassis. Also compatible for *LimitlessT model. Made with high quality and genuine polycarbonate Lexan®, 1.5mm thick Included the lexan wing + plastic supports and the hardware (screw, nuts and large plastic washers) to...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:7 EinsatzOn-Road Lackierungunlackiert
CHF117.90
Auf Lager
+
BDTR-190IRO
The IRON project has been made with the collaboration of expert industrial designer, it took several months to develop a product that can combine at best a stunning look and best performance at same time.
AuswahlhilfeRace-Truck 190mm Massstab1:10 EinsatzOn-Road Lackierungunlackiert HerstellerBittydesign
CHF54.90
Auf Lager
+
BDFWD-CA45
Product Features The body shell is UNIVERSAL and mounts on all 1/10 190mm models, both those specially developed by the manufacturers for the front-wheel drive (FWD) category and also those with traditional 4WD chassis (touring). Made with high quality and genuine polycarbonate Lexan®...
MaterialLexan AuswahlhilfeFWD 1:10 Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF37.50
Auf Lager
+
BDGT-190AGT
AGATA, a new body shell contender for the 1/10 GT division
Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Lackierungunlackiert HerstellerBittydesign
CHF38.90
Auf Lager
+
BDGT-190AS1
The body shell is UNIVERSAL and mounts on all 1/10 190mm models, the wing complies with the measures as per USGT regulation and can therefore be used at any race. Made with high quality and genuine polycarbonate Lexan® Included in the kit a complete set of screw, nuts and large plastic...
CHF43.90
Auf Lager
+
BDGT7-JTA
The body shell has been designed to fit the ARRMA® FelonyT chassis. Also compatible for *Infraction/LimitlessT platform. Made with high quality and genuine polycarbonate Lexan®, 1.5mm thick Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:7 EinsatzOn-Road Lackierungunlackiert
CHF109.90
Auf Lager
+
BDFWD-HCM
HC-M, a new body shell contender body shell for the 1/10 M-chassis FWD class
MaterialLexan AuswahlhilfeM-Chassis Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF32.00
Auf Lager
+
BDDG-ZL21
This project was born from the desire to create an extraordinary product developed specifically for drag races, "No Prep Street Outlaw" and "No Prep Street 13.5 stock" categories. Product Features: The body shell was designed on AE DR10 chassis but can also be mounted on Losi 22S...
MaterialLexan AuswahlhilfeDragster Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF64.90
Auf Lager
+
BDAR8-DIV
The body shell has been designed on the ARRMA® VendettaT chassis. Also compatible for Infraction 4WD MEGAT frame. Made with high quality and genuine polycarbonate Lexan®, 1mm thick Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:8 EinsatzOn-Road Lackierungunlackiert
CHF79.90
Auf Lager
+
BDFWD-190HBY
The body shell is UNIVERSAL and mounts on all 1/10 190mm models, both those specially developed by the manufacturers for the front-wheel drive (FWD) category and also those with traditional 4WD chassis (touring). Made with high quality and genuine polycarbonate Lexan® Included in the...
MaterialLexan AuswahlhilfeFWD 1:10 Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF34.90
Auf Lager
+
BD210225-HYB
MaterialLexan AuswahlhilfeM-Chassis Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF32.90
Auf Lager
+
BDGT8-S65
Fits all the chassis with 321-325-330mm wheelbase. A new point of referenece for the 1/8 GT class, Seven65 body is a game changer. Low centre of gravity, realism and pure performance, all in one! The body shell meet the specifications needed to participate in any 1/8 GT race in the...
MaterialLexan AuswahlhilfeRalleygame Massstab1:8 EinsatzOn-Road Lackierungunlackiert
CHF54.00
Auf Lager
+
BDCR-RK1
Bittydesign ROCK1 - 1/10 clear body for 313mm (12,3") Rock Crawler, Pre-Cut ROCK1, our first ever body shell for 1/10 Rock Crawlers This project was born from the desire to create a universal product that can be installed on all models with a 313mm wheelbase, compatible with both 106...
AuswahlhilfeCrawler MaterialLexan Massstab1:10 EinsatzCrawler/Scaler Lackierungunlackiert
CHF52.90
Auf Lager
+
BDTC-HYPM
The body shell meet the specifications needed to participate in any 1/10 M-Chassis race in the world and it's compatible with all the model car who have a 210-225mm wheelbase. Made with high quality and genuine polycarbonate Lexan® Included in the kit a complete set of screw, nuts and...
MaterialLexan AuswahlhilfeM-Chassis Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF29.90
Auf Lager
+
BDAR7-ZL21N
Product  Features The ZL-21N body shell has been designed to fit the ARRMA ®  Infraction ™  V2 chassis . Also compatible for *Limitless™ model. Made with  high quality and genuine polycarbonate  Lexan®, 1.5mm thick Included in the kit a...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:7 EinsatzOn-Road Lackierungunlackiert
CHF114.90
Auf Lager
+
BDFWD-CA45M
This project was born from the desire to expand our range of bodies for the 1/10 MINI category by offering a design that reproduces the volumes of the C segment. The CA45-M body represents the best result of performance and aesthetics into the same product, a great mix with modern and...
MaterialLexan AuswahlhilfeM-Chassis Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF37.90
Auf Lager
+
BDTC-190HYPHR
Product Features The body shell complies with all EFRA, IFMAR, ROAR, BRCA and FEMCA homologation specs, so it can be used in any National and International race. Made with high quality and genuine polycarbonate Lexan® Included in the kit a complete set of screw, nuts and large plastic...
Auswahlhilfe190mm Touring MaterialLexan Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF27.90
Auf Lager
+
BDTC-190ETR
The body shell complies with all EFRA, IFMAR, ROAR, BRCA and FEMCA homologation specs, so it can be used in any National and International race. Made with high quality and genuine polycarbonate Lexan® Included in the kit a complete set of screw, nuts and large plastic washers to fix...
Auswahlhilfe190mm Touring MaterialLexan Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF27.90
Auf Lager
+
BDGT7-VPR
The body shell has been designed to fit the ARRMA® FelonyT chassis. Also compatible for *Infraction/LimitlessT models. Made with high quality and genuine polycarbonate Lexan®, 1.5mm thick Included the lexan wing + plastic supports and the hardware (screw, nuts and large plastic...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:7 EinsatzOn-Road Lackierungunlackiert
CHF109.90
Auf Lager
+
BDGT-190S20
Seven20, a new contenderbody for the 1/10 GT division This project was born from the desire to offer to the enthusiast a body shell that could best combine maximum performance together with the realism of a true race supercar. The Seven20 body represents the best result of performance...
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF37.90
Auf Lager
+
BDCR-RK1-VS4
This project was born out of the desire to create a specially developed product for one of the crawler model that has quickly become a true milestone in scale crawling: Vanquish VS4-10. Our ROCK1 is by far the first and only aftermarket body designed with the direct collaboration of Vanquish...
AuswahlhilfeCrawler MaterialLexan Massstab1:10 EinsatzCrawler/Scaler Lackierungunlackiert
CHF89.90
Auf Lager
+
BDGT-190R8
The body shell is UNIVERSAL and mounts on all 1/10 190mm models, the wing complies with the measures as per USGT regulation and can therefore be used at any race. Made with high quality and genuine polycarbonate Lexan® Included in the kit a complete set of screw, nuts and large plastic...
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF42.90
Auf Lager
+
BDGT12-AGT
AGATA, a new body shell contender body shell for the GT12 division
Auswahlhilfe1:12 Massstab1:12 EinsatzOn-Road, On-Road Drift Lackierungunlackiert HerstellerBittydesign
CHF26.90
Auf Lager
+
BDGT8-HYP
HYPER-GT8, a new contenderbody shellcontender for the 1/8 GT division The project was born with the intention of creating a body shell for the 1/8 scale GT class with MAXIMUM performance with an eye always aimed also at aesthetics. The HYPER-GT8 body represents the best result of PURE...
AuswahlhilfeFlachbahn MaterialLexan Massstab1:8 EinsatzOn-Road Lackierungunlackiert
CHF54.00
Auf Lager
+
BDRX-190P10R
The body shell is UNIVERSAL and mounts on all 1/10 190mm models, both "touring" chassis as well the ones created specifically for the rally category. Compatible with Tamiya TT-02 chassis (in all its variants). Made with high quality and genuine polycarbonate Lexan® Included in the kit a...
CHF48.90
Auf Lager
+
BDTC-190HR
The ALL NEW ultra downforce body shell has been developed with the collaboration of our wordwide team drivers, who participated to the several stages of the project. The JP8HR includes all of our experience gained in over 10 years of presence on the racetrack, and the final version of the body requested many changes before reach the perfect shape. To raise the bar we not accepted any compromise.
Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Lackierungunlackiert HerstellerBittydesign
CHF29.90
Nicht auf Lager
BDCR-RK1-DC
Bittydesign BDCR-RK1-DC - Interior cockpit/seats for ROCK1 Crawler 1/10 body The interior is made of sturdy transparent polycarbonate that will allow you to have fun painting it in the colors and style of your choice an accessory particularly suitable for the most demanding enthusiasts for...
AuswahlhilfeCrawler Massstab1:10 EinsatzCrawler/Scaler HerstellerBittydesign
CHF32.90
Auf Lager
+
BDDG-M550
The body shell was designed on AE DR10 chassis but can also be mounted on Losi 22S chassis No Prep Drag, Traxxas Slash* 2wd Drag Car & Traxxas Drag Slash 1/10. Made with high quality and genuine polycarbonate Lexan®, 1mm thick * for installation on SlashT 2wd chassis it is necessary to...
MaterialLexan AuswahlhilfeDragster Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF64.90
Auf Lager
+
BD12-RBX
The body shell meet the specifications needed to participate in any 1/12 Pan-car race in the world, it's EFRA and IFMAR homologated. Made with high quality and genuine polycarbonate Lexan® Produced in Light Weight version, thickness of material 0,75mm Produced in Ultra Lite Weight...
MaterialLexan Auswahlhilfe1:12 Massstab1:12 EinsatzOn-Road Lackierungunlackiert
CHF27.90
Nicht auf Lager
BDTC-190M410ULT
New M410 ULT, to add speed performance speed add lightness
Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Lackierungunlackiert HerstellerBittydesign
CHF28.50
Auf Lager
+
BDMC7-DSTY
DESTROYER  is pure arrogance for your Infraction! This project was  born from the desire to create an extraordinary body shell developed  specifically for ARRMA. Premium Quality  first of all Our philosophy leads us not to...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:7 EinsatzOn-Road Lackierungunlackiert
CHF109.90
Auf Lager
+
BDGT-190VNM
VENOM, a new excellence body shell for the 1/10 GT division
Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Lackierungunlackiert HerstellerBittydesign
CHF39.90
Nicht auf Lager
BDGT8-R8
AR8-GT3, a new contenderbody shellcontender for the 1/8 GT division This project was born from the desire to offer to the enthusiast a body shell that could best combine maximum performance together with the realism of a true race supercar. The AR8-GT3 body represents the best result...
MaterialLexan AuswahlhilfeGT8 Massstab1:8 EinsatzOn-Road Lackierungunlackiert
CHF49.90
Auf Lager
+
BDGT12-S20
The body shell meet the specifications needed to participate in any GT12 race in the world, it's BRCA homologated. Made with high quality and genuine polycarbonate Lexan® Produced in Light Weight version, thickness of material 0,75mm Included in the kit a complete set of screw, nuts...
MaterialLexan Auswahlhilfe1:12 Massstab1:12 EinsatzOn-Road Lackierungunlackiert
CHF29.90
Auf Lager
+
BDGT12-LS3
LS3, a new body shell for the GT12 division
MaterialLexan Auswahlhilfe1:12 Massstab1:12 EinsatzOn-Road Lackierungunlackiert
CHF24.90
Nicht auf Lager
BDGT8-R8LW
AR8-GT3, a new contenderbody shellcontender for the 1/8 GT division The project was born with the intention of creating a body shell for the GT class 1/8 scale long wheelbase (LWB) with an eye always turned to aesthetics and realism. The AR8-GT3 body is in fact our best combination of...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:8 EinsatzOn-Road Lackierungunlackiert
CHF79.90
Auf Lager
+
CHF29.90
Auf Lager
+
BDGT12-AS1
The ARES-1 body is compatible with SupaStox and SupaStox GT plus any other 1/12 scale model in the GT12 category. Made with high quality and genuine polycarbonate Lexan® Produced in Light Weight version, thickness of material 0,75mm Included in the kit a complete set of screw, nuts and...
CHF28.90
Auf Lager
+
BDFRC-K004
Front cab design for more steering
AuswahlhilfeBuggy Massstab1:8 EinsatzOff-Road Lackierungunlackiert HerstellerBittydesign
CHF29.90
Nicht auf Lager
CHF21.90
Auf Lager
+
BDFRC-HB0613
Front cab style
AuswahlhilfeBuggy Massstab1:8 EinsatzOff-Road Lackierungunlackiert HerstellerBittydesign
CHF29.90
Nicht auf Lager
BDTC-190MC
Product Features
Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Lackierungunlackiert HerstellerBittydesign
CHF27.90
Nicht auf Lager
BDCR-RK1-C
Bittydesign ROCK1 - 1/10 'Cab-Only' body for Rock Crawler, Pre-Cut ROCK1, our first ever body shell for 1/10 Rock Crawler This project was born out of the desire to create a universal product that can be installed on any crawler model, the 'Cab-Only' look makes it particularly suitable for...
AuswahlhilfeCrawler MaterialLexan Massstab1:10 EinsatzCrawler/Scaler Lackierungunlackiert
CHF49.90
Nicht auf Lager
Filter
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller (1)