ERSATZTEIL-FINDER

BittyDesign

Italian Style & Design always searching the perfection

Trier par:
Recommandé
48
Karosserie AR8-GT3 1:7 Infraction/Limitless klar
BDGT7-R8
The body shell has been designed to fit the ARRMA® InfractionT V2 chassis. Also compatible for *LimitlessT model. Made with high quality and genuine polycarbonate Lexan®, 1.5mm thick Included the lexan wing + plastic supports and the hardware (screw, nuts and large plastic washers) to...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:7 EinsatzOn-Road Lackierungunlackiert
CHF117.90
En stock  
+ −
Karosserie ROCK1 klar für Vanquish VS4-10/Fordyce
BDCR-RK1-VS4
This project was born out of the desire to create a specially developed product for one of the crawler model that has quickly become a true milestone in scale crawling: Vanquish VS4-10. Our ROCK1 is by far the first and only aftermarket body designed with the direct collaboration of Vanquish...
AuswahlhilfeCrawler MaterialLexan Massstab1:10 EinsatzCrawler/Scaler Lackierungunlackiert
CHF89.90
En stock  
+ −
Liquid Mask Bittydesign 32oz (1kg)
BDLM32
 
CHF34.90
En stock  
+ −
Karosserie Seven65 1:7 Arrma Infraction/Limitless
BDGT7-S65
The body shell has been designed on the ARRMA® Infraction T V2 chassis. Also compatible for Limitless frame*. Made with high quality and genuine polycarbonate Lexan®, 1.5mm thick Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing *...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:7 EinsatzOn-Road Lackierungunlackiert
CHF94.50
En stock  
+ −
Karosserie No-Prep Dragracing 1:10
BDDG-ZL21
This project was born from the desire to create an extraordinary product developed specifically for drag races, "No Prep Street Outlaw" and "No Prep Street 13.5 stock" categories. Product Features: The body shell was designed on AE DR10 chassis but can also be mounted on Losi 22S...
MaterialLexan AuswahlhilfeDragster Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF64.90
En stock  
+ −
Liquid Mask Bittydesign 16oz (0.5kg)
BDLM16
Product Features the Liquid Mask is is ready to use, you not need to dilute it it is water-based withour solvent, not harmful to health. You can safely use it even at home Dries quickly when subjected to a jet of hot air Once the package is opened, if stored properly it can last for...
CHF22.90
En stock  
+ −
Karosserie Divina 1:8 Arrma Vendetta klar
BDAR8-DIV
The body shell has been designed on the ARRMA® VendettaT chassis. Also compatible for Infraction 4WD MEGAT frame. Made with high quality and genuine polycarbonate Lexan®, 1mm thick Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:8 EinsatzOn-Road Lackierungunlackiert
CHF79.90
En stock  
+ −
Karosserie Bittydesign IRON Truck 190mm klar 1:10
BDTRK-190IRO
The IRON project has been made with the collaboration of expert industrial designer, it took several months to develop a product that can combine at best a stunning look and best performance at same time. Developed for maximum performance The design of the IRON body shell represents the...
AuswahlhilfeRace-Truck 190mm Massstab1:10 EinsatzOn-Road Lackierungunlackiert HerstellerBittyDesign
CHF54.90
En stock  
+ −
Karosserie Bittydesign Type-6C F1 klar
BDF1-T6C
Product Features - Made with high quality and genuine polycarbonate Lexan® - Included a complete kit that contain a white plastic helmet and proper screws for assembly and fix it to the body - Produced only Light Weight version, thickness of material 0,75mm - Sold clear with...
AuswahlhilfeFormel 1 Massstab1:10 EinsatzOn-Road Lackierungunlackiert HerstellerBittyDesign
CHF26.40
stock au fournisseur
Entrepôt externe. Livraison en Externes Lager. Lieferung in ca. 14 Werktagen. jours ouvrables environ.
+ −
Karosserie ARES-1 1:10 190mm GT klar
BDGT-190AS1
The body shell is UNIVERSAL and mounts on all 1/10 190mm models, the wing complies with the measures as per USGT regulation and can therefore be used at any race. Made with high quality and genuine polycarbonate Lexan® Included in the kit a complete set of screw, nuts and large plastic...
CHF43.90
En stock  
+ −
Karosserie Falcon-X zu Traxxas UDR grün 1:7
BDTRX7-FLCX-PPG
Die   FALCON-X   ist eine neue Alternative für Ihr 1/7 UDR-Modell. Dieses Projekt entstand aus dem Wunsch, eine außergewöhnliche Karosserie zu schaffen, die speziell für das   TRAXXAS UDR -Modell entwickelt wurde. Das Hauptziel war es, eine alternative Form und Details zu bieten, die sich von...
AuswahlhilfeShort Course MaterialLexan Massstab1:7 EinsatzOff-Road Lackierunglackiert
CHF129.90
En stock  
+ −
Karosserie 1:7 JOTA für Arrma Felony/Infration/Lim
BDGT7-JTA
The body shell has been designed to fit the ARRMA® FelonyT chassis. Also compatible for *Infraction/LimitlessT platform. Made with high quality and genuine polycarbonate Lexan®, 1.5mm thick Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:7 EinsatzOn-Road Lackierungunlackiert
CHF115.00
En stock  
+ −
Karosserie ARES-1 1:7 Arrma Infraction klar
BDGT7-AS1
ARES-1 is the new body for 'high speed' challenges This project was born out of the desire to create an extraordinary product developed specifically for ARRMA, with the main aim of designing aerodynamics for speed. The body shell has been designed to fit the ARRMA® InfractionT V2 chassis....
CHF115.00
En stock  
+ −
Karosserie HC-F 1/10 190mm clear für FWD
BDFWD-190HCF
MaterialLexan AuswahlhilfeFWD 1:10, 190mm Touring Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF35.90
En stock  
+ −
Karosserie P-GT3R 1/7 Arrma Infraction/Limitless
BDAR7-PGT3R
  P-GT3R  is the a icon of style for your 1/7 scale model This project was born out of a desire to create  an extraordinary body developed especially for ARRMA , with the main intention of offering an iconic body shape  for fans of real GT3 racing cars . Premium Quality  first of...
MaterialLexan Massstab1:7 EinsatzOn-Road Lackierungunlackiert HerstellerBittyDesign
CHF115.00
En stock  
+ −
Karosserie 1:7 Viper für Arrma Felony klar
BDGT7-VPR
The body shell has been designed to fit the ARRMA® FelonyT chassis. Also compatible for *Infraction/LimitlessT models. Made with high quality and genuine polycarbonate Lexan®, 1.5mm thick Included the lexan wing + plastic supports and the hardware (screw, nuts and large plastic...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:7 EinsatzOn-Road Lackierungunlackiert
CHF109.90
En stock  
+ −
Karosserie TC Bittydesign Ascari 190mm 1:10
BDTC-190ASC
Tested for several months both indoor and even outdoor on different types of carpet and tarmac, the ASCARI body shell represent a new reality for drivers all around the world who race at top levels and always pretend to obtain the best result with their models.   Developed for...
Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Lackierungunlackiert HerstellerBittyDesign
CHF26.30
stock au fournisseur
Entrepôt externe. Livraison en Externes Lager. Lieferung in ca. 14 Werktagen. jours ouvrables environ.
+ −
Karosserie Seven65 1:8 GT klar
BDGT8-S65
Fits all the chassis with 321-325-330mm wheelbase. A new point of referenece for the 1/8 GT class, Seven65 body is a game changer. Low centre of gravity, realism and pure performance, all in one! The body shell meet the specifications needed to participate in any 1/8 GT race in the...
MaterialLexan AuswahlhilfeRalleygame Massstab1:8 EinsatzOn-Road Lackierungunlackiert
CHF54.00
En stock  
+ −
Karosserie ROCK1 für 313mm Crawler klar
BDCR-RK1
Bittydesign ROCK1 - 1/10 clear body for 313mm (12,3") Rock Crawler, Pre-Cut ROCK1, our first ever body shell for 1/10 Rock Crawlers This project was born from the desire to create a universal product that can be installed on all models with a 313mm wheelbase, compatible with both 106...
AuswahlhilfeCrawler MaterialLexan Massstab1:10 EinsatzCrawler/Scaler Lackierungunlackiert
CHF52.90
En stock  
+ −
Karosserie Hyper-M 1:10 M-Chassis klar 210-225
BDTC-HYPM
The body shell meet the specifications needed to participate in any 1/10 M-Chassis race in the world and it's compatible with all the model car who have a 210-225mm wheelbase. Made with high quality and genuine polycarbonate Lexan® Included in the kit a complete set of screw, nuts and...
MaterialLexan AuswahlhilfeM-Chassis Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF32.90
En stock  
+ −
Karosserie CA45 1:10 FWD klar 0,7mm
BDFWD-CA45
Product Features The body shell is UNIVERSAL and mounts on all 1/10 190mm models, both those specially developed by the manufacturers for the front-wheel drive (FWD) category and also those with traditional 4WD chassis (touring). Made with high quality and genuine polycarbonate Lexan®...
MaterialLexan AuswahlhilfeFWD 1:10 Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF37.50
En stock  
+ −
Foam Bumper für BDGT7-S65
BDARA-FOMS65
CHF19.90
En stock  
+ −
Karosserie ARES-1 GT12 klar
BDGT12-AS1
The ARES-1 body is compatible with SupaStox and SupaStox GT plus any other 1/12 scale model in the GT12 category. Made with high quality and genuine polycarbonate Lexan® Produced in Light Weight version, thickness of material 0,75mm Included in the kit a complete set of screw, nuts and...
CHF28.90
En stock  
+ −
Karosserie HC-M 1/10 M-chassis für 210-225mm
BDFWD-HCM
HC-M, a new body shell contender body shell for the 1/10 M-chassis FWD class The HC-M project was born from the desire to offer to all the rc enthusiast a new top quality body shell for the M-chassis cars with 210-225mm wheelbase. Tested for several months the product combine a stunning...
MaterialLexan AuswahlhilfeM-Chassis Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF32.00
En stock  
+ −
Karosserie P-GT3R 1:10 190mm klar
BDGT-190PGT3R
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF42.90
En stock  
+ −
Karosserie eptron 1:10 TC 190mm klar
BDTC-190ETR
The body shell complies with all EFRA, IFMAR, ROAR, BRCA and FEMCA homologation specs, so it can be used in any National and International race. Made with high quality and genuine polycarbonate Lexan® Included in the kit a complete set of screw, nuts and large plastic washers to fix...
Auswahlhilfe190mm Touring MaterialLexan Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF27.90
En stock  
+ −
Karosserie Hiberya 1:10 FWD 190mm klar
BDFWD-190HBY
The body shell is UNIVERSAL and mounts on all 1/10 190mm models, both those specially developed by the manufacturers for the front-wheel drive (FWD) category and also those with traditional 4WD chassis (touring). Made with high quality and genuine polycarbonate Lexan® Included in the kit...
MaterialLexan AuswahlhilfeFWD 1:10 Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF34.90
En stock  
+ −
Karosserie Hyper GT8 325-330mm Radst. 1:8 klar
BDGT8-HYP
HYPER-GT8, a new contenderbody shellcontender for the 1/8 GT division The project was born with the intention of creating a body shell for the 1/8 scale GT class with MAXIMUM performance with an eye always aimed also at aesthetics. The HYPER-GT8 body represents the best result of PURE...
AuswahlhilfeFlachbahn MaterialLexan Massstab1:8 EinsatzOn-Road Lackierungunlackiert
CHF54.00
En stock  
+ −
Karosserie Agata 1:10 GT 190mm klar
BDGT-190AGT
AGATA, a new body shell contender for the 1/10 GT division The AGATA project was born from the desire to offer to the rc enthusiast all over the world a body shell that could recall our origins, Emilia land of engines and dream car manufacturers. Tested over several months...
Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Lackierungunlackiert HerstellerBittyDesign
CHF32.90
En stock  
+ −
Karosserie ROCK1 klar für 313mm Crawler Cab only
BDCR-RK1-C
Bittydesign ROCK1 - 1/10 'Cab-Only' body for Rock Crawler, Pre-Cut ROCK1, our first ever body shell for 1/10 Rock Crawler This project was born out of the desire to create a universal product that can be installed on any crawler model, the 'Cab-Only' look makes it particularly suitable for...
AuswahlhilfeCrawler MaterialLexan Massstab1:10 EinsatzCrawler/Scaler Lackierungunlackiert
CHF49.90
En stock  
+ −
Karosserie 1:10 GT Ahura 190mm klar
BDGT-190AHU
The body shell is UNIVERSAL and mounts on all 1/10 190mm models, the wing complies with the measures as per USGT regulation and can therefore be used at any race. Made with high quality and genuine polycarbonate Lexan® Included in the kit a complete set of screw, nuts and large plastic...
CHF36.90
En stock  
+ −
Karosserie Bittydesign Type-6R F1 klar
BDF1-T6R
Tested for several months in Italy, both outdoor on different layout included also the ETS track of Riccione and indoor on multiple carpets with different level of grip, the body has undergone many changes required to provide a product that responds better to our handling's expectations on...
AuswahlhilfeFormel 1 Massstab1:10 EinsatzOn-Road Lackierungunlackiert HerstellerBittyDesign
CHF29.90
En stock  
+ −
Karosserie Bittydesign CA45M 1:10 M-Chassis
BDFWD-CA45M
This project was born from the desire to expand our range of bodies for the 1/10 MINI category by offering a design that reproduces the volumes of the C segment. The CA45-M body represents the best result of performance and aesthetics into the same product, a great mix with modern and...
MaterialLexan AuswahlhilfeM-Chassis Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF35.90
En stock  
+ −
Karosserie Short Course "Black Hawk" 1:10
BDSC-BLHK
Developed for everyone
AuswahlhilfeShort Course Massstab1:10 EinsatzOff-Road Lackierungunlackiert HerstellerBittyDesign
CHF44.90
En stock  
+ −
Karosserie Falcon-X 1:7 rot für Arrma Mojave 6S
BDSC7-FLCX-PPR
Die   FALCON-X   ist eine neue Alternative für Ihr 1/7   MOJAVE -Modell. Dieses Projekt entstand aus dem Wunsch, eine außergewöhnliche Karosserie zu schaffen, die speziell für das   ARRMA MOJAVE -Modell entwickelt wurde. Das Hauptziel war es, eine alternative Form und besondere Details zu...
AuswahlhilfeShort Course MaterialLexan Massstab1:7 EinsatzOff-Road Lackierunglackiert
CHF129.90
En stock  
+ −
Karosserie TC Hyper-HR 190mm lightweight klar
BDTC-190HYPHR
Product Features The body shell complies with all EFRA, IFMAR, ROAR, BRCA and FEMCA homologation specs, so it can be used in any National and International race. Made with high quality and genuine polycarbonate Lexan® Included in the kit a complete set of screw, nuts and large plastic...
Auswahlhilfe190mm Touring MaterialLexan Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF27.90
En stock  
+ −
Karosserie Falcon-X zu Traxxas UDR rot 1:7
BDTRX7-FLCX-PPR
Die   FALCON-X   ist eine neue Alternative für Ihr 1/7 UDR-Modell. Dieses Projekt entstand aus dem Wunsch, eine außergewöhnliche Karosserie zu schaffen, die speziell für das   TRAXXAS UDR -Modell entwickelt wurde. Das Hauptziel war es, eine alternative Form und Details zu bieten, die sich von...
AuswahlhilfeShort Course MaterialLexan Massstab1:7 EinsatzOff-Road Lackierunglackiert
CHF129.90
En stock  
+ −
Karosserie No Prep Drag Racing 1:10 M-550 klar
BDDG-M550
The body shell was designed on AE DR10 chassis but can also be mounted on Losi 22S chassis No Prep Drag, Traxxas Slash* 2wd Drag Car & Traxxas Drag Slash 1/10. Made with high quality and genuine polycarbonate Lexan®, 1mm thick * for installation on SlashT 2wd chassis it is necessary to...
MaterialLexan AuswahlhilfeDragster Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF64.90
En stock  
+ −
Karosserie Seven20 1/10 GT 190mm klar
BDGT-190S20
Seven20, a new contenderbody for the 1/10 GT division This project was born from the desire to offer to the enthusiast a body shell that could best combine maximum performance together with the realism of a true race supercar. The Seven20 body represents the best result of performance...
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF37.90
En stock  
+ −
Karosserie GT 1:10 Venom 190mm klar
BDGT-190VNM
VENOM, a new excellence body shell for the 1/10 GT division The VENOM project includes all our experience and know-how, designed with the collaboration of expert designer and tested with the help of our US Team drivers who participated in the development of a product that look stunning...
Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Lackierungunlackiert HerstellerBittyDesign
CHF39.90
En stock  
+ −
Karosserie ZL-21N 1:7 Arrma Infraction/Limitless
BDAR7-ZL21N
Product  Features The ZL-21N body shell has been designed to fit the ARRMA ®  Infraction ™  V2 chassis . Also compatible for *Limitless™ model. Made with  high quality and genuine polycarbonate  Lexan®, 1.5mm thick Included in the kit a...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:7 EinsatzOn-Road Lackierungunlackiert
CHF114.90
En stock  
+ −
Karosserie M410 TC 190mm light klar cutted Yokomo
BDTC-190M410-YOK
BDTC-190M410-YOK: Pre-cut for Yokomo BD8 '17 Bye bye scissors and dremel, our ??% Pre-Cut M410 body shell has finally arrived! High quality and perfect CNC cutting - 5mm forward for best performance - will remove the most annoying part of the preparation of the body. Unpacking the product,...
Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Lackierungunlackiert HerstellerBittyDesign
CHF39.90
En stock  
+ −
Karosserie KANJO-S 1:7 Arrma Felony precut 1.5mm
BDAR7F-KJSF
KANJO-S  is   a icon of style for your 1/7 scale model This project was born out of a desire to create   an extraordinary body developed especially for ARRMA , with the main intention of offering an body   for fans of the most iconic Japanese cars   of the 1990s-2000s.   Premium...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:7 EinsatzOn-Road Lackierungunlackiert
CHF109.00
En stock  
+ −
Karosserie KANJO-S 1:7 klar für Arrma Infraction/L
BDAR7-KJS
KANJO-S  is   a icon of style for your 1/7 scale model This project was born out of a desire to create   an extraordinary body developed especially for ARRMA , with the main intention of offering an body   for fans of the most iconic Japanese cars   of the 1990s-2000s.   Premium...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:7 EinsatzOn-Road Lackierungunlackiert
CHF105.00
En stock  
+ −
Karosserie KANJO-S 1:7 painted precut Arrma Infrac
BDAR7-KJS-PP
KANJO-S  is   a icon of style for your 1/7 scale model This project was born out of a desire to create   an extraordinary body developed especially for ARRMA , with the main intention of offering an body   for fans of the most iconic Japanese cars   of the 1990s-2000s. Premium Quality...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:7 EinsatzOn-Road Lackierunglackiert
CHF145.00
stock au fournisseur
Entrepôt externe. Livraison en Externes Lager. Lieferung in ca. 14 Werktagen. jours ouvrables environ.
+ −
Karosserie Falcon-X 1:7 klar für Traxxas UDR 1.5mm
BDTRX7-FLCX
Die FALCON-X ist eine neue Alternative für Ihr 1/7 UDR-Modell. Dieses Projekt entstand aus dem Wunsch, eine außergewöhnliche Karosserie zu schaffen, die speziell für das TRAXXAS UDR -Modell entwickelt wurde. Das Hauptziel war es, eine alternative Form und Details zu bieten, die sich von der...
AuswahlhilfeShort Course MaterialLexan Massstab1:7 EinsatzOff-Road Lackierungunlackiert
CHF99.90
En stock  
+ −
Karosserie GT12 Agata 1:12 Supastox klar
BDGT12-AGT
AGATA, a new body shell contender body shell for the GT12 division The AGATA project was born from the desire to offer to the rc enthusiast all over the world a body shell that could recall our origins, Emilia land of engines and dream car manufacturers. Tested for several months the product...
Auswahlhilfe1:12 Massstab1:12 EinsatzOn-Road Lackierungunlackiert HerstellerBittyDesign
CHF26.90
En stock  
+ −
Karosserie 1:7 Destroyer für Arrma Infraction/Limi
BDMC7-DSTY
DESTROYER  is pure arrogance for your Infraction! This project was  born from the desire to create an extraordinary body shell developed  specifically for ARRMA. Premium Quality  first of all Our philosophy leads us not to...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:7 EinsatzOn-Road Lackierungunlackiert
CHF98.90
En stock  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Auswahlhilfe
    Afficher tout (14)
Material
Prix

CHF  –  CHF

  • ‎CHF2.3
  • ‎CHF145
Massstab
Einsatz
Lackierung
Marke
    Afficher tout (17)
Effacer