BittyDesign

Italian Style & Design always searching the perfection

BDGT7-R8
The body shell has been designed to fit the ARRMA® InfractionT V2 chassis. Also compatible for *LimitlessT model. Made with high quality and genuine polycarbonate Lexan®, 1.5mm thick Included the lexan wing + plastic supports and the hardware (screw, nuts and large plastic washers) to...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:7 EinsatzOn-Road Lackierungunlackiert
CHF117.90
Auf Lager  
+
BDCR-RK1-VS4
This project was born out of the desire to create a specially developed product for one of the crawler model that has quickly become a true milestone in scale crawling: Vanquish VS4-10. Our ROCK1 is by far the first and only aftermarket body designed with the direct collaboration of Vanquish...
AuswahlhilfeCrawler MaterialLexan Massstab1:10 EinsatzCrawler/Scaler Lackierungunlackiert
CHF89.90
Auf Lager  
+
CHF34.90
Auf Lager  
+
BDTRK-190IRO
The IRON project has been made with the collaboration of expert industrial designer, it took several months to develop a product that can combine at best a stunning look and best performance at same time.
AuswahlhilfeRace-Truck 190mm Massstab1:10 EinsatzOn-Road Lackierungunlackiert HerstellerBittyDesign
CHF54.90
Auf Lager  
+
BDDG-ZL21
This project was born from the desire to create an extraordinary product developed specifically for drag races, "No Prep Street Outlaw" and "No Prep Street 13.5 stock" categories. Product Features: The body shell was designed on AE DR10 chassis but can also be mounted on Losi 22S...
MaterialLexan AuswahlhilfeDragster Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF64.90
Auf Lager  
+
CHF22.90
Auf Lager  
+
BDAR8-DIV
The body shell has been designed on the ARRMA® VendettaT chassis. Also compatible for Infraction 4WD MEGAT frame. Made with high quality and genuine polycarbonate Lexan®, 1mm thick Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:8 EinsatzOn-Road Lackierungunlackiert
CHF79.90
Auf Lager  
+
BDGT7-S65
The body shell has been designed on the ARRMA® Infraction T V2 chassis. Also compatible for Limitless frame*. Made with high quality and genuine polycarbonate Lexan®, 1.5mm thick Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:7 EinsatzOn-Road Lackierungunlackiert
CHF94.50
Auf Lager  
+
BDGT7-JTA
The body shell has been designed to fit the ARRMA® FelonyT chassis. Also compatible for *Infraction/LimitlessT platform. Made with high quality and genuine polycarbonate Lexan®, 1.5mm thick Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:7 EinsatzOn-Road Lackierungunlackiert
CHF115.00
Auf Lager  
+
BDGT-190AS1
The body shell is UNIVERSAL and mounts on all 1/10 190mm models, the wing complies with the measures as per USGT regulation and can therefore be used at any race. Made with high quality and genuine polycarbonate Lexan® Included in the kit a complete set of screw, nuts and large plastic...
CHF43.90
Auf Lager  
+
BDFWD-CA45
Product Features The body shell is UNIVERSAL and mounts on all 1/10 190mm models, both those specially developed by the manufacturers for the front-wheel drive (FWD) category and also those with traditional 4WD chassis (touring). Made with high quality and genuine polycarbonate Lexan®...
MaterialLexan AuswahlhilfeFWD 1:10 Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF37.50
Auf Lager  
+
BDFWD-190HCF
HC-F , a new body shellcontenderbody shell for the 1/10 FWD class The HC-F project was born from the desire to offer to all the rc enthusiast an new top quality body shell for the growing front wheel drive divison. Tested for several months the product combine a stunning realistic...
MaterialLexan Auswahlhilfe190mm Touring, FWD 1:10 Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF35.90
Auf Lager  
+
BDTRX7-FLCX-PPG
Die   FALCON-X   ist eine neue Alternative für Ihr 1/7 UDR-Modell. Dieses Projekt entstand aus dem Wunsch, eine außergewöhnliche Karosserie zu schaffen, die speziell für das   TRAXXAS UDR -Modell entwickelt wurde. Das Hauptziel war es, eine alternative Form und Details zu bieten, die sich von...
AuswahlhilfeShort Course MaterialLexan Massstab1:7 EinsatzOff-Road Lackierunglackiert
CHF129.90
Auf Lager  
+
BDAR8-GTR
  Premium Quality  first of all Our philosophy leads us not to settle for mediocrity or speculation, for each project we always pursue the same common thread:  the best or nothing . To obtain products that fully meet our expectations, we dedicate months of virtual design and rendering in...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:8 EinsatzOn-Road Lackierungunlackiert
CHF82.50
Auf Lager  
+
BDTC-HYPM
The body shell meet the specifications needed to participate in any 1/10 M-Chassis race in the world and it's compatible with all the model car who have a 210-225mm wheelbase. Made with high quality and genuine polycarbonate Lexan® Included in the kit a complete set of screw, nuts and...
MaterialLexan AuswahlhilfeM-Chassis Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF32.90
Nicht auf Lager
BDGT7-AS1
ARES-1 is the new body for 'high speed' challenges This project was born out of the desire to create an extraordinary product developed specifically for ARRMA, with the main aim of designing aerodynamics for speed. The body shell has been designed to fit the ARRMA® InfractionT V2 chassis....
CHF115.00
Auf Lager  
+
BDFWD-HCM
HC-M, a new body shell contender body shell for the 1/10 M-chassis FWD class
MaterialLexan AuswahlhilfeM-Chassis Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF32.00
Nicht auf Lager
BDGT7-VPR
The body shell has been designed to fit the ARRMA® FelonyT chassis. Also compatible for *Infraction/LimitlessT models. Made with high quality and genuine polycarbonate Lexan®, 1.5mm thick Included the lexan wing + plastic supports and the hardware (screw, nuts and large plastic...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:7 EinsatzOn-Road Lackierungunlackiert
CHF109.90
Auf Lager  
+
BDGT8-S65
Fits all the chassis with 321-325-330mm wheelbase. A new point of referenece for the 1/8 GT class, Seven65 body is a game changer. Low centre of gravity, realism and pure performance, all in one! The body shell meet the specifications needed to participate in any 1/8 GT race in the...
MaterialLexan AuswahlhilfeRalleygame Massstab1:8 EinsatzOn-Road Lackierungunlackiert
CHF54.00
Auf Lager  
+
BDFWD-190HBY
The body shell is UNIVERSAL and mounts on all 1/10 190mm models, both those specially developed by the manufacturers for the front-wheel drive (FWD) category and also those with traditional 4WD chassis (touring). Made with high quality and genuine polycarbonate Lexan® Included in the...
MaterialLexan AuswahlhilfeFWD 1:10 Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF34.90
Auf Lager  
+
BDGT-190PGT3R
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF42.90
Auf Lager  
+
BDCR-RK1
Bittydesign ROCK1 - 1/10 clear body for 313mm (12,3") Rock Crawler, Pre-Cut ROCK1, our first ever body shell for 1/10 Rock Crawlers This project was born from the desire to create a universal product that can be installed on all models with a 313mm wheelbase, compatible with both 106...
AuswahlhilfeCrawler MaterialLexan Massstab1:10 EinsatzCrawler/Scaler Lackierungunlackiert
CHF52.90
Auf Lager  
+
BDF1-T6R
The TYPE-6R body represent a new reality for drivers all around the world who race at top levels and always pretend to obtain the best result with their models.
AuswahlhilfeFormel 1 Massstab1:10 EinsatzOn-Road Lackierungunlackiert HerstellerBittyDesign
CHF29.90
Auf Lager  
+
BDFWD-CA45M
This project was born from the desire to expand our range of bodies for the 1/10 MINI category by offering a design that reproduces the volumes of the C segment. The CA45-M body represents the best result of performance and aesthetics into the same product, a great mix with modern and...
MaterialLexan AuswahlhilfeM-Chassis Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF35.90
Auf Lager  
+
CHF19.90
Auf Lager  
+
BDGT-190AGT
AGATA, a new body shell contender for the 1/10 GT division
Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Lackierungunlackiert HerstellerBittyDesign
CHF32.90
Auf Lager  
+
BDTC-190ETR
The body shell complies with all EFRA, IFMAR, ROAR, BRCA and FEMCA homologation specs, so it can be used in any National and International race. Made with high quality and genuine polycarbonate Lexan® Included in the kit a complete set of screw, nuts and large plastic washers to fix...
Auswahlhilfe190mm Touring MaterialLexan Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF27.90
Auf Lager  
+
BD210225-HYB
MaterialLexan AuswahlhilfeM-Chassis Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF32.90
Auf Lager  
+
BDTC-190HYPHR
Product Features The body shell complies with all EFRA, IFMAR, ROAR, BRCA and FEMCA homologation specs, so it can be used in any National and International race. Made with high quality and genuine polycarbonate Lexan® Included in the kit a complete set of screw, nuts and large plastic...
Auswahlhilfe190mm Touring MaterialLexan Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF27.90
Nicht auf Lager
BDGT8-HYP
HYPER-GT8, a new contenderbody shellcontender for the 1/8 GT division The project was born with the intention of creating a body shell for the 1/8 scale GT class with MAXIMUM performance with an eye always aimed also at aesthetics. The HYPER-GT8 body represents the best result of PURE...
AuswahlhilfeFlachbahn MaterialLexan Massstab1:8 EinsatzOn-Road Lackierungunlackiert
CHF54.00
Auf Lager  
+
BDCR-RK1-C
Bittydesign ROCK1 - 1/10 'Cab-Only' body for Rock Crawler, Pre-Cut ROCK1, our first ever body shell for 1/10 Rock Crawler This project was born out of the desire to create a universal product that can be installed on any crawler model, the 'Cab-Only' look makes it particularly suitable for...
AuswahlhilfeCrawler MaterialLexan Massstab1:10 EinsatzCrawler/Scaler Lackierungunlackiert
CHF49.90
Auf Lager  
+
BDGT-190S20
Seven20, a new contenderbody for the 1/10 GT division This project was born from the desire to offer to the enthusiast a body shell that could best combine maximum performance together with the realism of a true race supercar. The Seven20 body represents the best result of performance...
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF37.90
Auf Lager  
+
BDGT-190AHU
The body shell is UNIVERSAL and mounts on all 1/10 190mm models, the wing complies with the measures as per USGT regulation and can therefore be used at any race. Made with high quality and genuine polycarbonate Lexan® Included in the kit a complete set of screw, nuts and large plastic...
CHF36.90
Auf Lager  
+
BDAR7F-KJSF-PP
KANJO-S  is   a icon of style for your 1/7 scale model This project was born out of a desire to create   an extraordinary body developed especially for ARRMA , with the main intention of offering an body   for fans of the most iconic Japanese cars   of the 1990s-2000s.   Premium...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:7 EinsatzOn-Road Lackierunglackiert
CHF145.00
Auf Lager  
+
BDTC-190M410-YOK
passend zu Yokomo BD7 und BD8
Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Lackierungunlackiert HerstellerBittyDesign
CHF39.90
Auf Lager  
+
BDAR7-KJS-PP
KANJO-S  is   a icon of style for your 1/7 scale model This project was born out of a desire to create   an extraordinary body developed especially for ARRMA , with the main intention of offering an body   for fans of the most iconic Japanese cars   of the 1990s-2000s. Premium Quality...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:7 EinsatzOn-Road Lackierunglackiert
CHF145.00
Auf Lager  
+
BDGT12-AS1
The ARES-1 body is compatible with SupaStox and SupaStox GT plus any other 1/12 scale model in the GT12 category. Made with high quality and genuine polycarbonate Lexan® Produced in Light Weight version, thickness of material 0,75mm Included in the kit a complete set of screw, nuts and...
CHF28.90
Auf Lager  
+
BDGT12-AGT
AGATA, a new body shell contender body shell for the GT12 division
Auswahlhilfe1:12 Massstab1:12 EinsatzOn-Road Lackierungunlackiert HerstellerBittyDesign
CHF26.90
Auf Lager bei Lieferant
Externes Lager. Lieferung in ca. 14 Werktagen.
+
BDSC-BLHK
Developed for everyone
AuswahlhilfeShort Course Massstab1:10 EinsatzOff-Road Lackierungunlackiert HerstellerBittyDesign
CHF44.90
Auf Lager  
+
BDMC7-DSTY
DESTROYER  is pure arrogance for your Infraction! This project was  born from the desire to create an extraordinary body shell developed  specifically for ARRMA. Premium Quality  first of all Our philosophy leads us not to...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:7 EinsatzOn-Road Lackierungunlackiert
CHF98.90
Auf Lager  
+
BDSC7-FLCX-PPR
Die   FALCON-X   ist eine neue Alternative für Ihr 1/7   MOJAVE -Modell. Dieses Projekt entstand aus dem Wunsch, eine außergewöhnliche Karosserie zu schaffen, die speziell für das   ARRMA MOJAVE -Modell entwickelt wurde. Das Hauptziel war es, eine alternative Form und besondere Details zu...
AuswahlhilfeShort Course MaterialLexan Massstab1:7 EinsatzOff-Road Lackierunglackiert
CHF129.90
Auf Lager  
+
BDTRX7-FLCX-PPR
Die   FALCON-X   ist eine neue Alternative für Ihr 1/7 UDR-Modell. Dieses Projekt entstand aus dem Wunsch, eine außergewöhnliche Karosserie zu schaffen, die speziell für das   TRAXXAS UDR -Modell entwickelt wurde. Das Hauptziel war es, eine alternative Form und Details zu bieten, die sich von...
AuswahlhilfeShort Course MaterialLexan Massstab1:7 EinsatzOff-Road Lackierunglackiert
CHF129.90
Auf Lager  
+
BDAR7-PGT3R
  P-GT3R  is the a icon of style for your 1/7 scale model This project was born out of a desire to create  an extraordinary body developed especially for ARRMA , with the main intention of offering an iconic body shape  for fans of real GT3 racing cars . Premium Quality  first of...
MaterialLexan Massstab1:7 EinsatzOn-Road Lackierungunlackiert HerstellerBittyDesign
CHF115.00
Auf Lager  
+
BDDG-M550
The body shell was designed on AE DR10 chassis but can also be mounted on Losi 22S chassis No Prep Drag, Traxxas Slash* 2wd Drag Car & Traxxas Drag Slash 1/10. Made with high quality and genuine polycarbonate Lexan®, 1mm thick * for installation on SlashT 2wd chassis it is necessary to...
MaterialLexan AuswahlhilfeDragster Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF64.90
Auf Lager  
+
BDGT-190VNM
VENOM, a new excellence body shell for the 1/10 GT division
Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Lackierungunlackiert HerstellerBittyDesign
CHF39.90
Auf Lager  
+
BD12-RBX
The body shell meet the specifications needed to participate in any 1/12 Pan-car race in the world, it's EFRA and IFMAR homologated. Made with high quality and genuine polycarbonate Lexan® Produced in Light Weight version, thickness of material 0,75mm Produced in Ultra Lite Weight...
MaterialLexan Auswahlhilfe1:12 Massstab1:12 EinsatzOn-Road Lackierungunlackiert
CHF27.90
Auf Lager bei Lieferant
Externes Lager. Lieferung in ca. 14 Werktagen.
+
BDAR7-ZL21N
Product  Features The ZL-21N body shell has been designed to fit the ARRMA ®  Infraction ™  V2 chassis . Also compatible for *Limitless™ model. Made with  high quality and genuine polycarbonate  Lexan®, 1.5mm thick Included in the kit a...